Settings - Whirlpool WOC54E Guide D'utilisation Et D'entretien

Fahrenheit and Celsius
The temperature is factory preset to Fahrenheit but can be
changed to Celsius.
1. Press SETTINGS twice. "TEMP UNIT" and "FAHRENHEIT.
Press (1) for CELSIUS" will appear in the display text area.
2. Press the Temp/Time "1" keypad to change the temperature
unit.
3. "CELSIUS Selected" will scroll in the text area. The
temperature unit has been changed.
NOTE: A similar procedure can be done to return the temperature
unit to Fahrenheit.
Tones
Tones are audible signals, indicating the following:
Basic Functions
One tone
Valid pad press
Function has been entered
Oven is preheated
Three tones
Invalid pad press
Four tones
End of cycle
End of Kitchen Timer
Adjusting Sound On or Off
The oven sound is factory preset for On but can be changed to
Off.
1. Press SETTINGS three times. "SOUND" and "ON. Press
(1) for OFF" will appear in the display text area.
2. Press the Temp/Time "1" keypad to change the sound
setting.
3. "OFF Selected" will scroll in the text area. The sound setting
has been changed.
NOTE: A similar procedure can be done to return the sound
setting to On.
Adjusting Sound Volume
The oven sound is factory preset for High but can be changed to
Low.
1. Press SETTINGS four times. "SOUND VOLUME" and "HIGH.
Press (1) for LOW" will appear in the display text area.
2. Press the Temp/Time "1" keypad to change the sound
volume setting.
3. "LOW Selected" will scroll in the text area. The sound volume
setting has been changed.
NOTE: A similar procedure can be done to return the sound
volume setting to High.
Adjusting End Tone On or Off
The end tone is factory preset for On but can be changed to Off.
1. Press SETTINGS five times. "END TONE" and "ON. Press
(1) to OFF" will appear in the display text area.
2. Press the Temp/Time "1" pad to change the end tone setting.
3. "OFF Selected" will scroll in the text area. The end tone
setting has been changed.
NOTE: A similar procedure can be done to return the end tone
setting to On.
6

Settings

Adjusting Keypress Tone On or Off
The keypress tone is factory set for On but can be changed to
Off.
1. Press SETTINGS six times. "KEYPRESS TONE" and "ON.
Press (1) to OFF" will appear in the display text area.
2. Press the Temp/Time "1" pad to change the keypress tone
setting.
3. "OFF Selected" will scroll in the text area. The keypress tone
setting has been changed.
NOTE: A similar procedure can be done to return the keypress
tone setting to ON.
Adjusting Reminder Tone On or Off
The reminder tone is factory preset for On but can be changed to
Off.
1. Press SETTINGS seven times. "REMINDER TONE" and "ON.
Press (1) to OFF" will appear in the display text area.
2. Press the Temp/Time "1" pad to change the reminder tone
setting.
3. "OFF Selected" will scroll in the text area. The reminder tone
setting has been changed.
NOTE: A similar procedure can be done to return the reminder
tone setting to ON.
Clock
To Set the Clock:
Before setting, make sure the oven(s) and Timer are off.
1. Press SETTINGS once, and "CLOCK" appears in the text
area.
2. Press the Temp/Time keypad to enter the desired time. The
text area will change to "Press START."
3. Press START. "Time Set" will appear in the text area. Once
the display clears, the time is set.
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is factory preset for the 12-hour format.
To Change the Clock to 24-Hour Format:
1. Press SETTINGS eight times. "12/24 HOUR" and "12HR.
Press (1) for 24HR" will appear in the display text area.
2. Press the Temp/Time "1" keypad to change the 12/24 hour
setting.
3. "24HR Selected" will scroll in the text area. The 12/24 hour
setting has been changed.
NOTE: A similar procedure can be done to return the 12/24 hour
setting to 12HR.
Sabbath Mode
Sabbath Mode is used to configure the oven system so that
certain features and modes are disabled or defeatured. By
enabling Sabbath Mode, you will make the oven conform to
Star-K Jewish Sabbath requirements.
The oven is factory preset with Sabbath Mode Off.
To Enable Sabbath mode:
1. Press SETTINGS nine times. "SABBATH" and "OFF. Press
(1) for ON" will appear in the display text area.
2. Press the Temp/Time "1" pad to change the Sabbath setting.
3. "ON Selected" will scroll in the text area. The Sabbath setting
has been changed.
NOTE: A similar procedure can be done to return the Sabbath
setting to OFF.