Bosch GSB 1600 RE Professional Notice Originale page 12

12 | English
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Keyless chuck
(2) Front sleeve
(3) Rear sleeve
(4) "Drilling/impact drilling" selector switch
(5) Handle (insulated gripping surface)
(6) Lock-on button for on/off switch
(7) On/off switch
(8) Speed preselection thumbwheel
(9) Rotational direction switch
(10) Button for depth stop adjustment
(11) Wing bolt for depth stop adjustment
(12) Auxiliary handle (insulated gripping surface)
A)
(13) Depth stop
A)
(14) Universal bit holder
A)
(15) Screwdriver bit
B)
(16) Hex key
B)
(17) Open-ended spanner
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
B) Commercially available (not included in the scope of deliv-
ery)
Technical Data
Impact drill
Article number
Rated power input
Max. power output
No-load speed
Rated speed
Impact rate
Rated torque
Speed preselection
Clockwise/anti-clockwise ro-
tation
Spindle collar diameter
Max. drilling diameter
– Masonry
– Concrete
– Steel
– Wood
Chuck capacity
Weight according to
EPTA-Procedure 01:2014
1 609 92A 53E | (10.07.2019)
Impact drill
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise/vibration information
Noise emission values determined according to
EN 62841-2-1 .
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 98 dB(A); Sound power level 109
dB(A). Uncertainty K=5 dB.
Wear hearing protection
Vibration total values a
determined according to EN 62841-2-1 :
Drilling into metal: a
Impact drilling into concrete: a
A)
Screwdriving: a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
GSB 1600 RE
times when the tool is switched off or when it is running but
3 601 B18 1.. not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
W 701
over the total working period.
W 351
Implement additional safety measures to protect the oper-
-1
min 0–3 000
ator from the effects of vibration, such as servicing the
-1 power tool and application tools, keeping their hands warm,
min 1 640
and organising workflows correctly.
-1
min 26 270
Nm 2.0
Assembly
●
u
●
mm 43
Auxiliary handle (see figure A)
u
mm 18
mm 16
u
mm 12
mm 30
You can swivel the auxiliary handle (12) to any angle for a
mm 1.5–13
safe work posture that minimises fatigue.
kg 1.9
Turn the wing bolt for adjusting the auxiliary handle anti-
clockwise and swivel the auxiliary handle (12) into the re-
(triax vector sum) and uncertainty K
h
2
= 2.7 m/s , K = 1.5 m/s
h
= 23 m/s
h
2
< 2.5 m/s , K = 1.5 m/s
h
Pull the plug out of the socket before carrying out any
work on the power tool.
Do not operate your power tool without the auxiliary
handle (12).
Before carrying out any work, make sure that the wing
bolt is tightened. Loss of control can cause personal in-
jury.
GSB 1600 RE
/ II
2
,
2 2
, K = 3.5 m/s ,
2
.
Bosch Power Tools