Operating The Bottom Stapler - Josef Kihlberg F561 Mode D'emploi

Josef Kihlberg F561
KUDA PACKAGING

6.2 OPERATING THE BOTTOM STAPLER

– Load the stapling head with staples, (refer to chap-
ter 6.1). Ensure to use the right length of the staple
(refer to chapter 6.3).
– Place the carton on the anvil holder.
Warning: before stapling, ensure that
no part of your body is underneath
the stapling head
– Press the treadle
– The stapling head presses the carton and
automatically clinches the staple against the anvil.
SERVIS A NAHRADNÍ DÍLY
8
www.kuda-packaging.com
Fig. 7
Fig. 8
+420 607 237 237
info@kuda-packaging.com
servis@josef-kihlberg.eu
06.14