Indications For Use; Contraindications - Dentsply Sirona Lucitone 199 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Indications for Use:

LUCITONE 199
®
Resin is indicated
for the fabrication of prosthodontic
appliances.

Contraindications:

LUCITONE 199 Resin is contraindicated
for patients and users with a history of
allergic reaction to methyl methacrylate
monomer.
Warnings:
1.
Material contains polymerizable
monomers which may cause skin
sensitization (allergic contact
dermatitis) or other allergic reactions
in susceptible persons. Wear
protective gloves and protective
clothing. Wash thoroughly with soap
and water after contact. If dermatitis
or other symptoms persist, seek
medical advice.
2. Avoid inhalation or ingestion. High
vapor concentration can induce
headache, nausea, and irritation of
eyes and respiratory system. Work
in a well ventilated area. Liquid
contact with eyes may cause possible
corneal damage. Wear eye protection.
Excessive long-term exposure may be
associated with other more serious
health effects.
Inhalation: Move subject to fresh air.
Give oxygen or artificial respiration as
required.
Ingestion: Contact your regional
Poison Control Center immediately.
Eye Contact: Flush eyes promptly
with copious amounts of water for 15
minutes, and consult a physician. Wash
skin with soap and water.
Precautions:
1.
When grinding prosthodontic resins,
proper ventilation, masks, and vacuum
systems should be used.
2. Store at 60°-80°F (16°C - 27°C) away
from moisture and direct sunlight. The
liquid contains unsaturated monomers
which may polymerize prematurely if
stored at excessively high temperature
and/or in sunlight. The powder
contains an organic polymerization
initiator which may degrade if stored
at excessively high temperature.
3. LUCITONE Liquid and LUCITONE 199
Resin uncured resin are hazardous
materials. Dispose in accordance with
Federal, State, and local regulations.
4. LUCITONE Liquid contains methyl
methacrylate monomer, a flammable
liquid with a flash point of 10°C (50°F).
Keep away from heat, sparks, and
open flame.
5. Use liquid in a well ventilated area.
Replace cap when not in use.
6. Do not pack denture resin after work
time has elapsed or material has
become rubbery.
7.
Use of wax solvents is not
recommended. Residual solvent may
cause poor bonding of teeth to acrylic
base.
8. Corneal damage, headache, nausea,
vomiting may occur with exposure
to methyl methacrylate monomer.
(See Warnings and Precautions
statements.)
9. Allergic contact dermatitis and
other allergic reactions may occur
in susceptible individuals. Residual
1

Publicité

Table des Matières
loading

Table des Matières