Preparing For Use - Miele Compact C1 Mode D'emploi

Masquer les pouces Voir aussi pour Compact C1:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

en

Preparing for use

Attach the suction hose (dia. 01)
 Insert the hose connector into the
suction socket on the vacuum
cleaner until it clicks into position.
To detach the suction hose (dia. 02)
 Press the release buttons at the side
of the hose connector, and lift the
hose from the socket.
Connect the suction hose to the
handle (dia. 03)
 Fit the connector at the other end of
the suction hose into the handle until
it clicks into position.
Your vacuum cleaner is fitted with one
of the following tubes, depending on
the model:
– EasyLock suction tube
– Telescopic tube
To assemble the EasyLock tube
(dia. 04)
 Hold the suction tube by the connec-
tion piece and push it into the second
suction tube, turning it clockwise or
anti-clockwise until it clicks into posi-
tion.
 Slide the connection piece upwards
until it clicks into position.
Connect the handle to the suction
tube (dia. 05)
 Insert the handle into the suction
tube until it clicks into position. To do
this, line up the guides on the two
pieces.
38
To detach the handle
 To detach the handle from the suc-
tion tube, press the release button
and pull the handle out of the suction
tube, twisting it slightly as you do so.
Adjusting the telescopic suction tube
(dia. 06)
One part of the telescopic tube is
packed inside the other, and it can be
adjusted to suit your height for comfort-
able vacuuming.
 Press the release button and adjust
the tube to the desired height.
Attach the standard floorhead / hard
floorbrush (dia. 07)
 Push the suction tube into the floor-
head / floorbrush and turn it clock-
wise or anti-clockwise until it clicks
into position.
 To detach the floorhead / floorbrush
from the suction tube, press the lock-
ing button and pull the suction tube
away from the floorhead.
Using the SRD hard floorbrush
(depending on model)
Please observe the flooring manu-
facturer's cleaning and care instruc-
tions.
This hard floorbrush is especially suit-
able for vacuuming floors with deep
gaps and crevices, e.g. old wooden
flooring.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Scxx1

Table des Matières