Miele Compact C1 Mode D'emploi page 39

Masquer les pouces Voir aussi pour Compact C1:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

To adjust the AllTeQ floorhead
(dia. 08)
This vacuum cleaner can be used for
daily cleaning of carpets, rugs and ro-
bust hard flooring.
Miele offer a range of other floorheads,
brushes and accessories for other types
of flooring and special requirements
(see "Optional accessories").
Please observe the flooring manu-
facturer's cleaning and care instruc-
tions.
Vacuum carpets and rugs with the
brush retracted:
 Press the  foot control.
Clean hard flooring which is not sus-
ceptible to scratching, as well as floor-
ing with gaps or deep crevices in it with
the brush protruding:
 Press the  foot control.
To activate the exhaust filter change
indicator
Depending on model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters (dia.
09).
a AirClean
b Active AirClean 50 (black)
c AirClean Plus 50 (light blue)
d HEPA AirClean 50 (white)
If your vacuum cleaner is fitted with fil-
ter b, c or d, you need to activate the
exhaust filter change indicator.
 Press the release catch for the dust
compartment lid and raise the lid as
far as it will go (dia. 10).
 Remove the indicator strip (dia. 11).
 Press the exhaust filter change indic-
ator (dia. 12).
After approx. 10 - 15 seconds a thin red
line will appear in the left hand side of
the display (dia. 13).
 Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the dust-
bag when doing so.
Exhaust filter change indicator
The exhaust filter change indicator
shows the remaining functional life of
the exhaust filter. After approx. 50 oper-
ating hours, or approx. one year of av-
erage use, the display will be com-
pletely filled with red (dia. 14).
Using the accessories supplied
(dia. 15)
Dusting brush
Upholstery nozzle
Crevice nozzle
Accessory holder for the three
accessories supplied
Symbols on the holder show where to
attach the different accessories.
 Attach the accessories holder to the
suction tube when required (dia. 16).
AllTeQ floorhead (dia. 17)
For general use and also for vacuuming
the stairs.
en
39

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Scxx1

Table des Matières