Table des Matières
Publicité
SIGNODE BXT2-19
1
2
Fig. 15
1
Fig. 16
22
3
4
7
6
5
3
2
4
For Parts & Service 1-877-862-6699
5.9 SETTING STRAP WIDTH
The tool can be used with two different strap
widths:
– 16 mm (
/
")
5
8
– 19 mm (
/
")
3
4
a) Change strap width from 16 mm to 19 mm
– Remove battery from tool.
– Release sunk screw (15/2) and remove strap stop
16 mm (15/1).
– Lift the rocker lever towards the handle, release
sunk screw (15/4) and remove strap guide 16 mm
(15/3).
– Remove three cylinder screws (16/2).
– Lift the rocker lever towards the handle, remove cylin-
der screw (16/4) together with the strap stop rear
16 mm (16/3).
– Remove cover (16/1).
– Remove oval head screw (16/7) and remove strap
guide rear 16 mm (16/6) from lever.
– Install cover (16/1).
– Mount strap stop rear 19 mm (16/5).
b) Change strap width from 19 mm to 16 mm
– Mount 16 mm strap stop (15/1) and secure sunk
screw (15/2) with Loctite 222.
– Mount 16 mm strap guide (15/3) and secure sunk
screw (15/4) with Loctite 222.
– Remove strap stop rear 19 mm (16/5).
– Remove three cylinder screws (16/2) and remove
cover (16/1).
– Mount strap guide rear 16 mm (16/6).
– Install cover (16/1).
– Mount strap stop rear 16 mm (16/3).
07.15
Publicité
Table des Matières
Dépannage
