Table des Matières
Publicité
SIGNODE BXT2-19
WARNING
ATENCIÓN
ATTENTION
10
Inform yourself!
Read the operating instructions carefully.
Preventive and corrective maintenance on the tool may
only be carried out by trained personnel.
Protect yourself!
When operating the tool, wear eye, face, hand protection
(cut-proof gloves) and safety shoes.
Power source!
Before starting preventive or corrective maintenance, re-
move battery from the tool. Always inspect the electrical
plug and cable before use. If damaged, they must be
r eplaced by qualified personnel.
Warning:
Strap will snap forward!
When cutting the strap, hold the upper portion and stand
safely away from the strap.
Caution:
The lower strap will snap forward.
Warning:
Strap could break!
Do not stand in line with the strap while it is tensioned.
The strap could break!
Caution:
Only strap packed goods!
Do not put hands or other parts of the body between the
strap and the package during the strapping process.
Before strapping ensure that no other persons are in the
danger area.
Caution:
Danger of crushing!
Do not put your fingers into the tension wheel area.
Do not use water!
Do not use water or steam to clean the tool. When strap-
ping is performed outdoors, protect the tool from rain.
Only original spare parts may be used!
Using non-original spare parts will void the warranty and
any liability.
Use for the intended purpose
This tool is designed for strapping packages, pallet loads
and the like.
The tool is designed for use with plastic straps (poly-
propylene and polyester).
Possible misuse
The use of steel straps is not possible.
For Parts & Service 1-877-862-6699
3
SAFETY INSTRUCTIONS
07.15
Publicité
Table des Matières
Dépannage
