Removing Clogs - Panasonic MC-UG383 Manuel D'utilisation

WARNING
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum
cleaner suddenly starting.
+

Removing Clogs

Electrical Shock or Personal Injury Hazard
For best cleaning results, keep the airflow
passage clear.
➢ ➢ Unplug vacuum cleaner.
➢ ➢ Check each starred area occasionally
➢ ➢ Disconnect the hose from the nozzle
➢ ➢ Inspect hose end and clear any
➢ ➢ Reinstall hose and lower plate.
Hose
➢ ➢ While running the vacuum cleaner
Tuyau
Manguera
➢ ➢ If the clog still exists, turn the vacuum
➢ ➢ Turn the vacuum cleaner over,
➢ ➢ Remove the lower plate. Remove the
➢ ➢ Inspect the hose end and clear it of any
- 34 -
for clogs.
hose and check the hose for clogging.
obstructions.
with the hose disconnected, stretch
the hose in and out to remove the clog.
cleaner OFF and unplug the power
cord.
exposing the underside.
short nozzle hose from the housing by
lifting it straight up.
obstructions. Reinstall the short
nozzle hose and lower plate.