Telefunken H32V32 Mode D'emploi page 66

Fixed Volume Enable
Set as 'On' to enable the use of fixed volume value which is set in "Fixed Volume Value" menu item.
Fixed Volume Value
Set the value of the volume to be fixed.
Headphone Direct Volume
Set as 'Enabled' to control the headphone volume through remote control. When this feature is enabled,
volume control buttons will not change the TV's main sound. You can change the sound of the TV using the
Left/Right directional buttons of the remote control.
Note: If one of the Startup Volume Enable and the Fixed Volume Enable options is set as On, the other one will be
unavailable to be set.
OSD Disable
The default value is set as 'Disable Setup Menus' for hotel mode. You can block all menus by setting this
item as 'Disable All Menus'. You can also set as Off to deactivate this function. Invisable Setup Menus are:
Main menu: Installation, Channel list
Settings menu: Parental, Sources, Network/Internet Settings (if available), More
Teletext
You can enable or prohibit the teletext services(or MHEG if available) by setting this item as 'On' or 'Off'.
Copy To USB (USB cloning)
You can copy the NVRAM data (service list, preferences, etc.) and the welcome image as "hotel_wel.png" to
a USB device using this option. Press OK to copy those files from TV to USB.
Copy From USB (USB cloning)
You can copy the NVRAM data (service list, preferences, etc.) and the welcome image from a USB device
using this option. Press OK, select the directory named as "clone_x" and press OK again to copy NVRAM
data files from USB to TV. The welcome image should be named as "hotel_wel.png" and copied into the root
directory of the USB device. After selecting the Copy From USB option and pressing the OK button highlight
the folder which name appears as "." and then press OK in order to copy the welcome image from USB to TV.
Note: USB device, which will be used for USB cloning functions, must be FAT32 formatted.
Wakeup Time Channel
Set the channel, whose time information is to be used for wakeup timer. If this option is set as "0", time information
of the channel which is being watched will be used.
Note: If hotel mode is active, 'Add wake up timer' function will be available in 'Settings/Timers' menu. After
the new timer is saved, the TV will wake up automatically on desired time.
Wakeup Time Volume
Set the wakeup volume value of the TV. This value can't be set as greater than the value in 'Volume Limit'
menu item.
USB Option
Set as 'Off' to disable the USB ports on the TV. You can also set this option as 5V to provide 5 volts power over
USB. In this case it will still not be available to browse the USB content via Media Browser feature of the TV.
Fixed Pic. Mode
Set as 'On' to disable picture setting menus.
Digital Tuner
Set as 'Off' to disable digital channels. When a digital channel is opened from the channel list, "no signal"
message will be displayed and digital channels will not be listed when manual or auto searches are performed.
Multiple RC Support (up to 4)
You can choose one of the predefined remotes or set as 'Off'. You can set the RCU type from 'RCU program
menu'. The shortcut of this menu is BACK-1-2-3-4.
Note: For any MHEG supporting services you should press the INFO-RETURN/BACK-1-2-3-4 buttons buttons consecutively.
The multiple RC support works on RC5 type of remote controllers.
English - 65 -