Reproduction Of This Handbook - Medion AKOYA X55005 Mode D'emploi

page de 151

/ 151
Matières
Table des Matières
Signets

Table des Matières

Types of pixel error:

 Type 1:

Pixels shining for a long time (bright, white point), although not activated.

A white pixel arises because of the illumination of all three sub-pixels.

 Type 2:

Pixels not shining (dark, black point), although activated

 Type 3:

Abnormal or defective sub-pixels coloured red, green or blue (e.g. shining for a long time with half

brightness, not lighting one colour, flashing or flickering, but not Type 1 or 2)

Addition: Cluster of Type 3 (= failure of two or more sub-pixels in a block of 5 x 5 pixels. A cluster is a field of 5 x 5

pixels (15 x 5 sub-pixels).

Classes of pixel error:

Error Class

The permitted number of errors of the types specified above in each class of error relates to a million pixels and

must be converted in accordance with the physical resolution of the display.

A maximum permitted number in Error Class II follows from this:

For a resolution of

1024 x 768 (15")

1280 x 1024 (17,18, 19")

1600 x 1200 (19")

1440 x 900 (19" wide)

1600 x 900 (20" wide)

1680 x 1050 (20" wide, 22" wide)

1920 x 1080 (23" wide)

1920 x 1200 (25" wide)

Error Class I is only used in the case of special applications, e.g. in the medical sector, and is associated with

corresponding supplementary costs. Error Class II has become established as the standard for manufacturers

conscious of quality and with very good display units.

Example:

A 23" display unit consists of 19020 horizontal and 1080 vertical scanning elements (pixels), that is 2,073,600

pixels in total. This gives a factor of about 2.07 in relation to one million pixels.

Error Class II therefore allows 4 errors of both Type 1 and Type 2, 10 Type 3 errors and 4 Type 3 clusters.