FriFri Silofrit Manuel D'installation Et Mode D'emploi page 13

CLEANING
Warning
Do not use a water jet or steam cleaner, and do not
Immerse this appliance.
Allow the appliance to cool before cleaning.
Before starting to clean the appliance, disconnect from the
mains. All steel parts should be washed in warm water,
using a neutral detergent. Thoroughly dry the appliance.
Avoid using abrasive or corrosive detergents which could
damage the steel.
What to do if not using the appliance for a lengthy
period
Thoroughly clean and dry the machine as described.
Disconnect the power supply.
What to do in the event of a fault
In the event of a fault, immediately switch the appliance off,
turn off the power at the mains supply and call the after
sales department.
MAINTENANCE
All maintenance should be carried out by qualified
personnel only. Before carrying out any maintenance work,
disconnect the appliance from the mains supply.
THE 2002/96/EC DIRECTIVE (WEEE): information to
users
This informational note is meant only for
owners of equipment marked with the symbol
shown in Fig. A on the adhesive label
featuring the technical specifications applied
on the actual product
(the label also giving the serial number).
This symbol indicates that the product is classified,
accor ding to the regulations in force, as an item of electrical
and electronic equipment and conforms to EU Directive
2002/96/EC (WEEE) meaning that, at the end of its service
life, it must be treated separately from domestic waste, i.e. it
must be handed in free of charge to a separate waste
electrical and electronic equipment collection centre or re-
turned to the reseller when buying a new equivalent item of
equipment.
The user is responsible for delivering the appliance at the
end of its life to the appropriate collection facilities. Failure to
do so shall result in the user being subject to the penalties
prescribed by the legislation in force on waste.
Suitable separated collection so that the appliance no longer
used can be sent off for environmentally compatible
recycling, treatment and disposal helps avoid possible
negative effects on the environment and on health and
facilitates the recycling of the product's component
materials.
For more detailed information on available collection
systems, contact the local waste disposal service or the
shop you purchased the unit from.
Producers and importers fulfil their responsibility for
environmentally compatible recycling, treatment and
disposal both directly and by joining a collective scheme.
13