Cavavin V-024WDZ Manuel D'instruction page 42

SINGLE ZONE DISPLAY BOARD OPERATING INSTRUCTION
Model: V-265WSZ
① Power switch control key
⑤ Temperature rise control key
window
⑧ Measured temperature display window
⑩ Function display window
1. Power Button:
standby mode: short press the button, the power is switched on, the machine starts.
Boot state: press for 3 seconds, the window 7 shows the countdown 321 to power off the whole machine.
Function Key: When you need to set the temperature, please press the function key then press the ⑤ or
2.
⑥ button to achieve the desired temperature.
3. Lighting button / Celsius Fahrenheit Conversion key: Press to switch on/ off the LED lights.
Hold it for 3 seconds to switch between Celsius and Fahrenheit (window⑦ ⑧)
4. Child lock: Press and hold the key for 3 seconds to set or remove the screen lock.
5. Temperature UP Key: When you need to set the temperature, please first press the function setting key
② then press ⑤ to increase the temperature of 1 degree (temperature will be displayed in the window ⑦)
6. Temperature DOWN Key: When you need to set the temperature, please first press the function setting
key ② then press ⑥ to decrease the temperature of 1 degree (temperature will be displayed in the window
⑦)
7. window⑦ Display the current setting temperature
8. window⑧ Display the current measured temperature
9. window⑨ Show the current average humidity
② Function setting key
⑥ Temperature down control key
⑨ Average humidity display window
③ LED lamp switch control key
⑦ Temperature setting display
④ Child lock
42