Cavavin V-028WDZ Manuel D'instruction page 37

Model: V-028WDZ,
1. ON/OFF the power button: Press the button 3 seconds to power off or power on.
2. Upper zone temperature setting up button: Cycle button: press one time, the inside temperature (window
3) will reduce 1 degree Celsius, until down to the lowest, press one time, the temperature will go back to the
highest
3. Window: Displays upper zone temperature.
4. Window: Display lower zone temperature.
5. Lower zone temperature setting up button: Cycle button: press on time, the inside temperature (window 4)
will reduce 1 degree Celsius, until down to the lowest, press one time, the temperature will back to the
highest.
6. C/F display conversion function keys: Set the conversion degrees Celsius / Fahrenheit display, each press
this button, the display window will be into degrees Celsius of Fahrenheit.
7. Light / Power Button: Press the button and the lamp turns on, the lamp will turn off once press again.
SINGLE ZONE DISPLAY BOARD OPERATING INSTRUCTION
Model: V-265WSZ
1. Power Button: Press and hold the power button for 3 seconds to turn off the unit. Press it again for 3 seconds
to turn it back on.
2. Function Key: Press the key to view these functions: window [7] shows the setting temperature inside the
cabinet, window [9] shows the humidity inside the cabinet, window [10] shows if the WI-FI and Bluetooth
functions are turned on.
3. Light Key: Each time the key is pressed, the LED light will be turned "ON" or "OFF".
4. Lock Key: Press and hold the key for 3 seconds to set or remove the screen lock.
5. Temperature UP Key: Each time the key is pressed, the temperature and humidity raised; WI-FI and
Bluetooth will be turned on.
6. Temperature DOWN Key: Each time the key is pressed, the temperature and humidity decrease; WI-FI and
Bluetooth will be turned off.
7. Display Setting Temperature
37