Bosch DAF220 Notice Originale page 15

daf220_bu_2609140572_003.fm Seite 16 Montag, 8. September 2008 2:22 14
16 |
2) Measure the Corner Angle
– Place the legs flat on the walls.
– Store the corner angle by again
pressing the COMPOUND MTR
button.
– The entry is confirmed by the ap-
pearance of "CNR" in the display.
3) Determine the Miter Angle &
Bevel Angles
– Press the COMPOUND MTR
button again to display the nec-
essary miter angle
– "MTR" appears in the display.
– Press the COMPOUND MTR
button again to display the nec-
essary bevel angle.
– "BVL" appears in the display.
– If necessary, the miter angle can
be retrieved by pressing the
COMPOUND MTR button again.
2 609 140 572 | (8.9.08) Bosch Power Tools