Free Dose Beverage Delivery; Coffee Dose Programming - LAVAZZA INOVY Mode D'emploi

EN

FREE DOSE BEVERAGE DELIVERY

Do steps: , ,
DELIVERY
PRESSO
Press the FREE DOSE BEVERAGE
start delivery. Once the desired amount of brewed cof-
fee is reached, press the button again to stop brewing.
During supply, the FREE DOSE BEVERAGE
button is turned on with blinking white light, the dis-
play shows the animation of the selected beverage.
For a new supply cycle, wait for supply buttons
and multifunction button turning on with steady
white light.
Once supply is over, lift and then lower the capsule
loading lever to unload the exhausted capsule.
In case of soluble pods, it is recommended that a brief
plain (i.e. by using only water) supply should be dis-
pensed before inserting the pod, so that you can best
enjoy the product.
40
PREPARING THE COFFEE
and in paragraph ES-
.
button to

COFFEE DOSE PROGRAMMING

Measures are always programmed using the same
key; any other keys are ignored. The programmed
amount of brewed coffee (minimum 20 ml / 0,6 oz)
can be changed by repeating the programming.
Should a coffee dose lower than 20 ml (0,6 oz) be
set, the coffee machine will store in any case the
minimum coffee dose that can be set.
Lift the capsule loading lever until it locks into po-
sition to open the capsule fitting compartment.
Put a Lavazza
fitting compartment.
ESPRESSO
AROMATICO
100% ARABICA
capsule into the pod