Display Language - Panasonic KX-TGA661EXB Manuel D'installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
TGA661EX(ex).book Page 5 Wednesday, April 13, 2011 4:16 PM
Battery installation/Battery charging
When the language selection is displayed after installing the batteries for the
first time, you can select your desired language.
{r}: Select your desired language. s M s {ic}
Important:
• Use the supplied rechargeable batteries. For replacement, we recommend
using the Panasonic rechargeable batteries noted in the base unit's operating
instructions.
• Wipe the battery ends (S, T) with a dry cloth.
• Avoid touching the battery ends (S, T) or the unit contacts.
• Confirm correct polarities (S, T).
• USE ONLY Ni-MH batteries AAA (R03) size.
• Do NOT use Alkaline/Manganese/Ni-Cd batteries.
Place the handset on the charger for about 7 hours before initial use.
Note:
• The handset display may show "Please wait for 1 minute." when the
handset is placed on the charger if it is not registered to the base unit.
• If the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends (
,
S
T
charge again.

Display language

1
8/1 (middle soft key) (11)
2
{r}: Select your desired language. s M s {ic}
Registering the handset to the base unit
Ensure that the handset is switched on. If it is not on, press and hold {ic} for
few seconds to turn the handset on.
1
Handset:
Lift the handset and press {ic}.
2
Base unit:
Proceed with the operation for your model.
N KX-TG6611/KX-TG8051/KX-TG8611/KX-TG8621
Press and hold {x} for about 5 seconds. (No registration tone)
N KX-TG6621/KX-TG6631/KX-TG8061
Press and hold {x} for about 5 seconds, until the registration tone sounds.
(page 2: 2)
) and the charge contacts with a dry cloth and
5

Publicité

Table des Matières
loading

Table des Matières