Operation - Atag WU7011RM Notice D'utilisation

USE

Operation

EN 6
Switching extraction on and off
• Press the '+' button.
The cooker hood will switch on at the lowest setting.
• Press the '+' button again for a higher fan setting. Press and hold
the '+' button for 1 second to select the highest setting (boost).
• Press the '-' button to select a lower setting.
The extraction setting is indicated in the speed level indicators.
Each light area represents a speed level. Speed level indicator 4
also serves as a boost indicator when it blinks.
• If the extraction setting is set at 1, you can switch off the cooker
hood by quickly pressing and releasing the '-' button.
• To switch off the cooker hood from, press and hold the '-' button for
at least 1 second.
Switch on boost setting:
• Press and hold the '+' button for at least 1 second.
The boost setting is switched on for 10 minutes. The speed level 4
indicator will flash during this period. The original extraction setting
will be reactivated after this period.
• Press and release the '-' button to switch off the boost setting.
Note!
If the boost setting has been selected, you cannot activate the timer
function.
Switching on the timer
• Press the timer button.
The timer indicator will start to blink.
The cooker hood will switch off automatically after 10 minutes.