Loudness Adjustment (Loud); Subwoofer Output (Sub.w) - Pioneer Super Tuner III DEH-P47DH Mode D'emploi

Audio Adjustment

Loudness Adjustment (LOUD)

The Loudness function compensates for deficiencies in the low and high sound ranges at
low volume. You can select a desired Loudness level.
1. Press the AUDIO button and select the Loudness mode (LOUD) in the Audio
Menu.
2. Switch the Loudness function
ON/OFF with the 5/∞ but-
tons.
3. Select the desired level with
the 2/3 buttons.
LOW + = MID + = HI

Subwoofer Output (SUB.W)

When a Subwoofer is connected, switch Subwoofer output ON. Initially, Subwoofer out-
put is OFF.
The Subwoofer output phase can be switched between normal, or 0˚ ("NOR"), and reverse,
or 180˚("REV"). 0˚ is the default phase.
Note:
• When the Subwoofer Controller setting is "S/W CTL:EXT", you cannot switch the Subwoofer
ON/OFF mode. In this case, this setting is not necessary. (Refer to page 39.)
• Select the OFF setting when you do not want the Subwoofer to operate.
1. Press the AUDIO button and select the Subwoofer ON/OFF mode
(SUB.W) in the Audio Menu.
2. Switch the Subwoofer output
ON/OFF with the 5/∞
buttons.
3. Change the phase of Subwoofer
output with the 2/3 buttons.
31
" "
" "