Loudness Adjustment (Loud); Subwoofer Output (Sub-W1) - Pioneer SUPER TUNER III DEH-P7300 Mode D'emploi

Audio Adjustment

Loudness Adjustment (Loud)

The Loudness function compensates for deficiencies in the low and high sound ranges at
low volume. You can select a desired Loudness level.
1. Press the AUDIO button and select the Loudness mode (Loud) in the Audio
Menu.
2. Switch the Loudness function
ON/OFF with the 5/∞ but-
tons.
3. Select the desired level with
the 2/3 buttons.
Low + = Mid + = High

Subwoofer Output (Sub-W1)

When a Subwoofer is connected, switch Subwoofer output ON.
Initially, Subwoofer output is ON.
The Subwoofer output phase can be switched between normal, or 0˚ ("Normal"), and
reverse, or 180˚("Rev."). 0˚ is the default phase.
Note:
• When the Subwoofer Controller setting is "S.W Control:EXT", you cannot switch the Subwoofer
ON/OFF mode. In this case, this setting is not necessary. (Refer to page 44.)
• Select the OFF setting when you do not want the Subwoofer to operate.
1. Press the AUDIO button and select the Subwoofer ON/OFF mode (Sub-W1)
in the Audio Menu.
2. Switch the Subwoofer output
ON/OFF with the 5/∞
buttons.
3. Change the phase of
Subwoofer output with the
2/3 buttons.
37