Preparation Before Use; Maintenance & Care - Hkoenig RP412 Manuel D'utilisation

• Please keep this document at hand and give it to the
future owner in case of transfer of your device

PREPARATION BEFORE USE

1. Take apart the frying pan, scoops and stone plate, clean with a soft damp cloth. Place your
appliance on the level and stable surface.
2. Check that the voltage marked on the product corresponds with your supply voltage.
Ensure the controller is in the "MIN" position before plug in.
OPERATION
1. Connect the BBQ to the power supply. Turn the switch from "O" TO "-" position for
working, then pre-heating the BBQ set for 5 minutes.
2. As the different heat of cooking request, put your food on the scoop(s) and place them
under the heating sources. Or place your food directly on the frying pan for the purpose of
grilling.
3. When you have finished using the BBQ, turn the switch to "-" position and unplug it from
the socket. Wait until the appliance is completely cool down before moving or cleaning.
MAINTENANCE & CARE
1. Make sure the plug is removed from the power supply
socket. After the BBQ grill set is completely cooled
down, clean it with the mild cleaner or gel-like cleaner
by using soft cloth.
PLEASED DO NOT CLEAN THE SET WHEN IT IS
STILL HOT.
2. DO NOT USE hard brushes, scratchy materials and/or
alcohol, petrol or any organic cleaner for the cleaning
purpose
3. Except the removable frying pan, do not immerse the
main body in water to clean.
4. Put the BBQ grill set on the cool place right after the
cleaning.