Recommendations To The User; Starting-Up - TopCold MNS00010.03 Mode D'emploi

4. Recommendations for the User
Refrigerated cabinets were conceived in order to conserve food during short periods of time and for food products in general.
In order to ensure that the machine is operating properly it is necessary to follow the following instructions:
 Children should be supervised to ensure that they do not play with the device.
 Avoid as much as possible the opening of doors;
 When placing foods, ensure that there is good natural air circulation inside the cupboard;
 Do not place heated foods inside the cupboard;
 Do not use pointed objects to remove ice - that could damage the evaporator and be dangerous to health and environment.
 Cover the foods with a protection to avoid damaging the evaporator.
 Do not load the shelves with more than its maximum load capacity (20 Kg).
 Place some crushed ice into the containers to keep fish humidity (only for Snack Fish Cabinet X3).
 If you do not fallow the advises above, there will be an increase of electrical energy.
4.1 - Starting- up
Ensure that the plug has been introduced correctly into the socket or that the switch for the cupboard has been connected.
Then connect the cupboard, which involves – see also the enclosed electronic controller data shit:
 Press button "A", placing it on "ON", the green light will light up and shall confirm the connection, attend, and at the same time,
the display will flash for a few seconds until it indicates the inside temperature.
 Temperature regulation is carried out automatically by electronic thermostat "B".
4.2 – Brake working instructions (option for M8 and N1)
4.3 – PJ microprocessor instructions
4.3.1 Definitions
Set Point – The lowest temperature in ºC inside the counter.
Differential – Interval of temperature in ºC for the working of the counter.
MNS00010.03
TEC
INSTRUCTIONS MANUAL
A - ON / OFF
B –ELECTRONIC CONTROLLER – Thermostat
Brake
St - set point
Rd - Differential
N.º
MNS00010.03
Release the brake
11/31