Adjusting The Image; Zoom Adjustment; Focus Adjustment; Keystone Adjustment - Eiki LC-NB2W Mode D'emploi

BASIC OPERATION
Press the ZOOM button on the Top Control or the ZOOM
1
button on the Remote Control Unit to turn into the ZOOM
mode.
2 Press the POINT UP button or the ZOOM
image larger, and press the POINT UP button or the ZOOM
button to have the smaller.
In the Computer mode, the image can be expanded, compressed,
and panned with the Digital Zoom function. Refer to page 28 for the
Digital Zoom operation.
1 Press the FOCUS button on the Top Control or the FOCUS
/ button on the Remote Control Unit to turn into the FOCUS
mode.
Adjust the focus of the image by pressing the POINT
2
UP/DOWN button or the FOCUS
If the picture obtained keystone distortion, correct screen with KEYSTONE adjustment.
Press the KEYSTONE
1
or select the Keystone on the SCREEN menu. (Refer to page
28, 29.) The message "Keystone" is displayed.
2 Correct the Keystone distortion by pressing the KEYSTONE
/ button or the POINT UP/DOWN button(s). Press the
KEYSTONE
upper part or the image, and press the KEYSTONE
the POINT DOWN button to reduce the lower part.
GB
20

ADJUSTING THE IMAGE

ZOOM ADJUSTMENT

FOCUS ADJUSTMENT

/ button.

KEYSTONE ADJUSTMENT

/ button on the Remote Control Unit
button or the POINT UP button to reduce the
Reduce the upper width with the KEY STONE
button or the POINT UP button.
Reduce the lower width with the KEY STONE
button or the POINT DOWN button.
/
button to have the
The message disappears after 4 seconds.
The message disappears after 4 seconds.
Keystone
button or
The message disappears after 4 seconds.
Zoom
Focus