Table des Matières
Publicité
5.0 AT Command Line Interface
La description
Obtenez Piège / Set SNMP.
Exemple
Commander:
AT+MASNMPTRAP=1 <enter>
Réponse:
OK
Commander:
AT+MASNMPTRAP?
Réponse:
+MASNMPTRAP:
OK
La description
Obtenir la configuration d'authentification / Set.
Exemple
Commander:
AT+MAAUTH?
Réponse:
+MAAUTH:
OK
© Microhard 2016
Mode
: 1 - Enable
Name
: TrapUser
IP
: 0.0.0.0
AuthFailureTraps : 0 - Disable
Mode
: 1 - Local&RADIUS
ServerIP
: 0.0.0.0
ServerPort : 1812
SharedSecret : nosecret
AT+MASNMPTRAP
Syntaxe de la commande(Effet: AT&W)
AT+MASNMPTRAP[=<Mode>[,<Name>,<IP>
[,<AuthFailureTraps>]]
<Mode>:
0 - Disable
1 - Enable
<Name>:
Trap Community Name. 1 to 32 characters
<IP>:
Trap Manage Host IP. Default 0.0.0.0 (Disable)
<AuthFailureTraps>:
0 - Disable
1 - Enable
Usage:
AT+MASNMPTRAP
AT+MASNMPTRAP=0
AT+MASNMPTRAP=1[,<Name>,<IP>
[,<AuthFailureTraps>]]
Syntaxe de la commande(Effet: AT&W)
AT+MAAUTH[=<Mode>[,<ServerIP>,
<ServerPort>,<SharedSecret>]]
<Mode>:
0 - Local
1 - Local&RADIUS
<ServerIP>:
Remote Server IP Address
<ServerPort>:
Remote Server IP Port. 0 to 65535. Default 1812
<SharedSecret>:
5 to 64 characters
Usage:
AT+MAAUTH
AT+MAAUTH=0
AT+MAAUTH=1
[,<ServerIP>,<ServerPort>,<SharedSecret>]
AT+MAAUTH
202
Publicité
Table des Matières
