Table des Matières
Publicité
5.0 AT Command Line Interface
La description
Afficher / Ajouter / Supprimer / Release / ReleaseAll la liaison Adresse MAC-IP.
Syntaxe de la commande(Effet: AT&W)
AT+MNIPMAC=<Operation>[,<Name>[,<IP Address>,<MAC Address>]]
Operation: SHOW - Show the details of the MAC-IP address binding
Name: Name of the MAC-IP binding
IP Address : Valid IP address
MAC Address: The physical MAC address of the device or interface
Usage:
Exemple
Commander:
AT+MNIPMAC=add,PC,192.168.168.150,0A0B0C0D0E0F<enter>
Réponse:
OK
Commander:
AT+MNIPMAC?
Réponse:
1: PC, 192.168.168.150, 0A0B0C0D0E0F, Not active
OK
Commander:
AT+MNIPMAC=RELEASEALL<enter>
Réponse:
Network DHCP server is restarted.
OK
© Microhard 2016
ADD - Add a new MAC-IP address binding
DEL - Delete an existing MAC-IP address binding
RELEASE - Release the active DHCP lease
RELEASEALL - Release all active DHCP leases
AT+MNIPMAC
AT+MNIPMAC=SHOW,<Name>
AT+MNIPMAC=ADD,<Name>,<IP Address>,<MAC Address>
AT+MNIPMAC=DEL,<NAME>
AT+MNIPMAC=RELEASE,<NAME>
AT+MNIPMAC=RELEASEALL
AT+MNIPMAC
177
Publicité
Table des Matières
