Microhard Systems BulletPlus Manuel Utilisateur page 198

5.0 AT Command Line Interface
La description
Définir l'événement Rapport UDP Rapport No.1 /
2/3.
Exemple
Commander:
AT+MAEURD1=1,192.168.168.111,2010,10<enter>
Réponse:
OK
La description
Définir Rapport NMS.
Exemple
Commander:
AT+MANMSR=1,20200,300<enter>
Réponse:
OK
La description
Get/Set NMS Server.
Exemple
Commander:
AT+MANMSSRV=nms.microhardcorp.com,mytech,myp
ass,mypass <enter>
Réponse:
OK
© Microhard 2016
Syntaxe de la commande(Effet: AT&W)
AT+MAEURD1=<Mode>[,<Remote
IP>,<Remote Port>,<Interval Time>
[,Interfaces]]
Mode : 0 Disable
1 Modem Event Report
2 SDP Event Report
3 Management Report
Remote IP : valid IP address
Remote Port : 0 to 65535
Interval Time: 0 to 65535 seconds
Interfaces : (optional) 0 Disable; 1 Enable
Modem, Carrier and WAN for Modem Event
Report. For instant, "1,1,1" to enable all interfaces
Ethernet, Carrier, USB, COM and IO for
Management Report. For instant, "0,0,0,0,0" to
disable all interfaces
Syntaxe de la commande(Effet: AT&W)
AT+MANMSR=<Mode>[,<Remote Port>,
<Interval Time_s>]
Mode:
0 Disable
1 Enable NMS Report
AT+MANMSSRV
Syntaxe de la commande(Effet: AT&W)
AT+MANMSSRV[=<Server>,<Name>,
<Password>,<Confirm Password>]
<Server>:
NMS Server/IP. 1 to 63 characters
<Name>:
Domain Name. 1 to 63 characters
<Password>:
Domain Password. 5 to 64 characters
<Confirm Password>:
Same as <Password>. 5 to 64 characters
AT+MAEURD1
AT+MAEURD2
AT+MAEURD3
AT+MANMSR
198