Intended Use - Becker Centronic TimeControl TC445-II Notice De Montage Et D'utilisation

Masquer les pouces Voir aussi pour Centronic TimeControl TC445-II:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The transmitter described in these instructions must only be used indoors for
the operation of Centronic-compatible radio drives and radio control units.
• Please note that radio-controlled systems may not be used in areas with
a high risk of interference (e.g. hospitals, airports).
• The remote control is intended solely for use with equipment and sys-
tems in which malfunctions in the transmitter or receiver would not pose
any risk to persons, animals or property, or which contain safety devices
to eliminate such risks.
• The operator is not protected from interference from other telecommu-
nications systems and terminal equipment (e.g. even from radio-con-
trolled systems which are properly operated in the same frequency
range).
• Only connect radio receivers to devices and systems approved by the
manufacturer.
Ensure that the control unit is not installed or operated
close to metal surfaces or magnetic fields.
Radio-controlled systems transmitting on the same fre-
quency may cause reception interference.
Note that the range of the radio signal is limited by legis-
lation as well as by design.

Intended use

33 - en

Publicité

Table des Matières
loading

Table des Matières