Advanced Color Setting - Sony CDX-GT660UP Mode D'emploi

Customizing the display and
button color — Custom Color
You can register a customized color for the
display and buttons.
1 Press and hold .
The DAY/NIGHT custom color display
varies according to the DIMMER setting.
2
Rotate the control dial until "BASE
COLOR" appears, then press it.
You can select a preset color as a basis
for further customizing.
When you select "BASE COLOR,"
customized color is overwritten.
3
Rotate the control dial to select from
"RGB RED," "RGB GREEN," or "RGB
BLUE," then press it.
4
Rotate the control dial to adjust the
color range, then press it.
Adjustable color range: "0" – "32."
You cannot set "0" for all color ranges.
5
Press
Changing DAY/NIGHT color mode
You can set a different color for DAY/
NIGHT depending on the DIMMER
setting.
Color mode
DAY
NIGHT
*1 For details on the DIMMER, see page 25.
*2 Available only when the illumination control
lead is connected.
1
Select "DAY/NIGHT" in step 2.
2
Select "DAY" or "NIGHT."
3
Customize the preset channel from step 2 to
5.
20
(BACK).
DIMMER*
1
OFF or AUTO (turn
off the head light*
ON or AUTO (turn on
the head light*

Advanced color setting

SensMe™ Channels
synchronization
— SensMe™ Channels Color
The color of the display and buttons on the
main unit changes according to the
SensMe™ channel.
1
Press and hold the select button.
The setup display appears.
2
Rotate the control dial until "SENSME
COLR" appears, then press it.
3
Rotate the control dial to select
"SENSME-ON," then press it.
4
Press
To cancel SensMe™ Channels Color, select
"OFF" on step 3.
Note
When SensMe™ Channels Color is set to "ON"
for the SensMe™ source, SensMe™ Channels
Color overrides the preset color/pattern settings.
Changing the color with
sound synchronization
— Sound Synchronization
)
2
When you select a preset pattern or play
tracks in the SensMe™ channel, sound
)
2
synchronization becomes effective.
1
Press and hold the select button.
The setup display appears.
2
Rotate the control dial until "SOUND
SYNC" appears, then press it.
3
Rotate the control dial to select
"SYNC-ON," then press it.
4
Press
(BACK).
(BACK).