Maintenance And Cleaning; Technical Data - IKA MTS 2/4 digital Mode D'emploi

Maintenance and cleaning

The IKA ® MTS 2/4 digital is maintenace-free. It is subject only to the
natural wear and tear of components and their statistical failure rate.
When ordering spare parts, please give the manufacturing number
shown on the type plate, the machine type and the name of the spare
part.
Please send in equipment for repair only after it has been clea-
ned and is free from any materials which may constitute a health
hazard. Use only cleansing agents which have been appro-
ved by IKA to clean IKA devices. To remove use:
® ®
Dyes
Construction materials
Cosmetics
Foodstuffs
Fuels
For materials which are not listed, please request information from
IKA . Wear the proper protective gloves during cleaning of the devices.
®
Electrical devices may not be placed in the cleansing agent for the pur-
pose of cleaning.
Before using another than the recommended method for cleaning or
decontamination, the user must ascertain with the manufacturer that
this method does not destroy the instrument.
Repair:
Please send in instrument for repair only after it has been
cleaned and is free from any materials which may constitute a
health hazard.
For repair, please request the "Decontamination Certificate" form
IKA or use the download printout of it from IKA
®
ika.com.
If you require servicing, return the instrument in its original packaging.
Storage packaging is not sufficient. Please also use suitable transport
packaging.
12
isopropyl alcohol
water containing tenside / iso
propyl alcohol
water containing tenside / iso
propyl alcohol
water containing tenside
water containing tenside
website: www.
®

Technical data

Design voltage VAC
VAC
or
Design frequency Hz
Input power W
Speed range 1/min
Speed setting
Speed display
Drive
Agitation stroke mm
Shaking motion
Time switch min
Display
Perm. duration of operation %
Perm. ambient temperature °C
%
Perm. relative humidity
Protection class acc.
DIN EN 60529
Protection class
Overvoltage category
Contamination level
Fuse
Operation at a terrestrial m
Max. load
Dimensions (W x H x D) mm
Weight kg
Subject to technical changes!
230 ± 10%
115 ± 10%
50 / 60
45
0 - 1100 (infinitely adju-
stable)
Turn dial on front side
Scale 0 - 1100
Speed controlled
asynchronous motor
3 Ø
horizontal, circular
1-99 / continuoues operation
digital
100
+5 to +40
80
IP 21
I
II
2
2x T4A 250 V
(IKA -Id.Nr. 28 205 00)
®
max. 2000 above
altitude sea level
4 microtiter plates
185 x 105 x 320
(without attachment)
2.7