2.
Insert the upper pipe into the joint while holding
down the stopper pin. Make sure that the pin pops up
through the stopper hole and securely locks the lower
pipe.
2
1
5
► 1. Lower pipe 2. Stopper hole 3. Stopper pin
4. Upper pipe 5. Joint
3.
Securely tighten the hex socket head bolt to fix the
joint.
1
► 1. Joint 2. Hex socket head bolt
3
4
2
4.
Cut the cable tie (nylon fastener), and remove it
from the tool.
1
► 1. Cable tie
Handle
1.
Loosen the hex socket head bolt on the handle.
► 1. Hex socket head bolt 2. Handle
10 ENGLISH
1
2