Warranty Disclaimer - Hama 00118071 Mode D'emploi

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep
these instructions in a safe place for future reference. If you sell the device, please pass
these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to speci c
hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
2. Package Contents
• TV wall bracket • Installation kit (see contents, Fig. 1)
• TV support arms (2x) • These operating instructions
Note
Please check that the installation kit is complete before installing the
bracket and ensure that none of the parts are faulty or damaged.
3. Safety Notes
Warning
• Given the multitude of terminal devices and wall structures available on the market,
the supplied mounting kit is unable to cover every option.
• It occasionally happens that the screws for attaching the terminal device to the wall
bracket are too long.
• Please note that the supplied wall plugs are for use with concrete brick and solid
brick walls only.
• Read the operating instructions for your terminal device before attempting to mount
it. The instructions provide information about the type and measurements of suitable
fastening materials.
• If the supplied mounting kit does not contain suitable fastening materials for
mounting the terminal device, purchase these from a specialised dealer.
• If the wall on which the bracket is to be mounted is made of different material types
and construction types to those speci ed, purchase suitable mounting materials from
a specialised dealer.
• Never apply force during mounting. This can damage your end device or wall
bracket.
• If in doubt, have this product mounted by a quali ed technician - do not attempt to
mount it yourself!
Note – Commercial use
• If the device is used commercially, increased duty of care requirements apply.
• Therefore, please observe the accident prevention regulations of the German
employer's liability insurance association for electrical systems and equipment.
Please also observe all accident prevention regulations from other applicable
employer's liability insurance associations and accident insurance companies, as
well as any legal regulations applicable to the particular industry and/or location.
• The wall bracket must be installed by trained personnel or by a special technician,
especially when installed in schools, educational institutions, hobby/self-service
workshops or other publicly accessible institutions.
• Secure the product and the attached load against falling using suitable equipment
(e.g. an arresting cable) and in accordance with locally applicable regulations. We
strongly recommend these additional safeguards even if they are not legally required.
• Have trained personnel carry out regular inspections to ensure that the product is
securely installed, properly functioning and in acceptable condition (we recommend
inspections at least every 6 months, or more frequently if required for the particular
location) and then document these inspections.
• Do not mount the product above locations where persons might linger.
• Once you have mounted the product and the attached load, check that they are
su ciently secure and safe to use.
• You should repeat this check at regular intervals (at least every three months).
• When doing so, ensure that the product does not exceed its maximum permitted
carrying capacity and that no load exceeding the maximum permitted dimensions is
attached.
• Make sure that the product is loaded symmetrically.
• During adjustment, ensure that the product is loaded symmetrically and that the
maximum permitted carrying capacity is not exceeded.
• Maintain the necessary safety clearance around the attached load (depending on the
model).
• In the event of damage to the product, remove the attached load and stop using the
product.
2
4. Intended use and specifications
• The bracket is only intended for use within buildings.
• Use the bracket only for the intended purpose.
Maximum load bearing capacity:
Screen size:
Depth:
Angle:
Wall mounting plate dimensions:
Mounting holes:
5. Installation requirements and installation
Note
• Only mount the TV wall bracket with the help of a second person. Get the support
and help you need.
• Different end devices have different options for connecting cables and other devices.
Before installation, ensure that the necessary connections will still be accessible
after installation.
• The same mounting kit is included with all of our TV wall brackets. Depending on
the product and mounting type, you may not need to use the entire mounting kit.
Unneeded screws and other small parts may be left over, even if the wall bracket
is properly mounted. Keep these leftover parts with the operating instructions in a
safe place, just in case you might need them later on (e.g. should you move, sell the
product, mount the wall bracket in a different location, buy a new TV, etc).
Warning
• This product is suitable for wall mounting only.
• Before installing the bracket, ensure that the wall on which the television is to be
mounted is suitable for the weight and make sure that no electrical wires, water, gas
or other lines are located at the installation location.
• Please note that the provided wall anchors are only approved for concrete and solid
brick walls.
• Observe the other warnings and safety instructions.
• Proceed step-for-step in accordance with the illustrated installation instructions (Fig.
1 ff.).
• The shackle diameter of the padlock must be 4 to 6 mm. (Padlock not included in the
extent of delivery)
Note
• Given the multitude of terminal devices available on the market, we cannot describe
all possible mounting options here.
• Please ensure that the bracket lays at and evenly on the back of the television.
• Use the enclosed spacer to even out any unevenness on the back of the television.
• Ensure that all screws have the proper length and can be mounted until they are
hand-tight (see Fig. 2).
6. Setting and maintenance
Note
Only adjust the TV wall bracket with the help of a second person. Get the support and
help you need.
• To secure, insert the carrying arms into the wall plate so that they click into place.
• To adjust the tilt, loosen the side handles, set the desired tilt angle and then tighten
again.
• To unlock the bracket, pull the safety cord downwards and release the bracket.
• The bracket can only be unlocked and the TV removed if no padlock is attached.
• Check that the bracket is secure and safe to use at regular intervals (at least every three
months). Only use water or standard household cleaners for cleaning.

7. Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting
from improper installation/mounting, improper use of the product or from failure to observe
the operating instructions and/or safety notes.
00118071: 50 kg
00118074: 50 kg
00118071: 81.0 - 165.0 cm (US: 32" - 65")
00118074: 94.0 - 203.0 cm (US: 37" - 80")
00118071: 8.2 cm
00118074: 8.2 cm
-10°/+5° (depends on the device)
00118071: 44.8 x 15 cm
00118074: 65.3 x 15 cm
according to the VESA standard until
00118071: 400x400
00118074: 600x400