Inspecting And Replacing Anode - Yamaha 115C Manuel D'utilisation

5) With the outboard motor in an verti-
cal position, using a flexible or pres-
surized filling device, inject outboard
motor hypoid gear oil (SAE 90) into
the oil drain plug hole.
Gear oil capacity:
Refer to SPECIFICATIONS, Page 4-1.
601033
6) When oil begins to flow out of the oil
level plug hole, insert and tighten the
oil level plug.
7) Screw in the oil drain plug.
EML24010
INSPECTING AND REPLACING
ANODE
Yamaha outboard motor is protected
from corrosion by a sacrificial anode.
Check the anode periodically. Remove the
scales from surfaces of the anode.
For the replacement of the anode, consult
603024
a Yamaha dealer.
cC
Do not paint the anode, for this would
render it ineffective.
405016
4-24
GB