Quick Guide - Bosch+Sohn boso medicus vital Mode D'emploi

Quick guide

¬ Insert batteries, ensure correct position-
ing (P. 54)
¬ Connect cuff to monitor (P. 58)
¬ Attach cuff (P. 59)
¬ Start (and stop) a measurement by
pressing the start button (P. 62)
Measured systolic, diastolic and pulse
values are displayed after the measure-
ment is completed (P. 64)
¬ Retrieving values from memory (P. 66):
Press the START-button for about 3
seconds with the monitor switched off.
The first value displayed is the average
value of all stored measurements
together with the WHO classification.
The individual measurement values are
then displayed in sequence.
This quick guide does not replace the
detailed information on the use and
safety of the blood pressure monitor fea-
tured in the user instructions.
Please be sure therefore to read
the user instructions!
EN
49