Sony CDX-A250 Mode D'emploi page 7

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

E SEEK –/+ buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
F Disc slot
To insert the disc (label side up), playback
starts.
G Z (eject) button
To eject the disc.
H
(front panel release) button 4
I AUX input jack 12
To connect a portable device.
J Receptor for the card remote
commander
K RESET button (located behind the front
panel) 4
L SENS/BTM button
To improve weak reception: LOCAL/MONO
(press); start the BTM function (press and
hold).
M EQ3 (equalizer) button 11
To select an equalizer type (XPLOD,
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
N SOURCE button
To power on; change the source (Radio/CD/
AUX).
O Volume control dial/select button 11
To adjust volume (rotate); select setup items
(press and rotate).
P MODE button 8
To select the radio band (FM/MW/LW).
Q DSPL (display)/DIM (dimmer) button
4, 8
To change display items (press); change the
display brightness (press and hold).
R Display window
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
ql < (.)/, (>) buttons
To control CD/Radio, the same as (SEEK)
–/+ on the unit.
w; VOL (volume) +/– button
To adjust volume.
wa ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
ws SEL (select) button
To select items.
wd M (+)/m (–) buttons
To control CD, the same as (1)/(2) –/+ on
the unit.
wf SCRL (scroll) button 8
To scroll the display item.
wg Number buttons
To receive stored stations (press); store
stations (press and hold).
*1 When an ATRAC CD is played.
*2 When an MP3/WMA is played.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
"Replacing the lithium battery of the card remote
commander" on page 14.
7

Publicité

Table des Matières
loading

Table des Matières