Ceado E5SD Manuel D'utilisation page 19

GB
PREPARATION AND USE
Before first use: rinse all of the parts that will have contact with food in running water i.e.:
bellows, discharge spout, tray.
SWITCHING ON
1
Turn the ON-OFF switch to position "I" (9 Fig. 1).
2
Prepare the desired quantity of coffee beans to be ground in the shaker provided (12 Fig. 2).
3
Position the filter-holder on the fork (6 Fig. 1) (with or without the supplied funnel 11 Fig. 2). If
you want to pour the coffee into the container (10 Fig. 2) provided, position it on the fork blocking
it under the support (14 Fig. 1).
4
Start the motor with the start/stop button (8 Fig. 1). The luminous logo (15 Fig. 2) lights up.
Always start the motor of the coffee grinder before putting coffee beans into the bellows
(running empty).
5
To reduce static electricity (present especially in some types of coffee) apply 2-3 splashes of
water using the spray bottle supplied (13 Fig. 2) on the beans ready for grinding.
6
Pour the desired quantity of coffee beans into the bellows opening (2 Fig. 1).
If the luminous logo (15 Fig. 2) starts to flash and you realise that the remaining time will not
be enough to grind all the coffee beans, press the start/stop button (8 Fig. 1) again.
7
After all the coffee beans have been ground completely, tap the bellows (2 Fig. 1) with your
hand, making sure your palm fully covers the opening, to let all the ground coffee fall out.
Functions of the motor start/stop button and grinding time (8 Fig. 1)
A push of the button activates the motor for a period of 20 seconds. During these 20 seconds
the motor and therefore the LED will be ON.
At the end of the 20 seconds there are 10 additional seconds of motor operation that warn the
operator of the end of the cycle with a flashing LED.
So the time of the complete motor operation cycle is 30 s, except in the following cases:
• If the button is pressed during the interval when the LED is flashing, another complete cycle is
restarted; otherwise, at the end of the interval, the motor and the LED are switched off.
• If the button is pressed during the 20 interval (LED with fixed light), the machine is switched
off instantly.
• If the button is pressed during the interval when the LED is flashing, for a duration longer than
two seconds, the machine is turned off instantly.
19