Component Identification - Nexgrill Evolution INFRARED PLUS 730-0882A Guide Du Propriétaire

Match Light
1. If the burner will not light after several
attempts then the burner can be match lit,
before using the match allow 5 minutes for
any accumulated gas to dissipate.
2. Clip a match on one end of the lighting rod.
3. Light match.
4. Hold lighting rod and insert lighted match
right next to the burner ports or ceramic file.
5. Push and turn the designated control knob
to " ".
6. Burner should ignite immediately.
Note: Remove all packaging, including straps, before using the grill
Main Burner
Main Burner
Control Knob, Label
10
Side Burner

Component Identification

Side Burner