Install The Batteries In The Remote Control; Install The Wall Support Of The Remote Control - Fanelite 100YFT-200 TIGA Mode D'emploi

12. INSTALL THE BATTERIES IN THE REMOTE CONTROL

NOTE : If you intend to not use your remote control or ceiling fan for a long time, we advise you to
remove the batteries from the remote control to preserve it.
The remote control works with 2 batteries 1,5V AAA.
In order to insert the batteries or change the batteries when they are empty :
Slide the battery compartment cover (on the back of the remote control) downwards to remove it. Insert 2
batteries 1,5V AAA by respecting the polarity.
Close the cover by sliding it upwards.

13. INSTALL THE WALL SUPPORT OF THE REMOTE CONTROL

Install the supplied wall support by using the screws and washers provided so that you can store your remote
control on its wall support.
Depending of the structure of your wall, use suitable screws and washers.
2 batteries Back of the
1.5V AAA remote control
Cover of the
batteries
29