Install The Canopy; Install The Batteries In The Remote Control - Fanelite 60YFA-1002 OURAGAN Mode D'emploi

Check that all electrical connections have been correctly made and that the receiver and the wires are prop-
erly stored in the hanger bracket.

12. INSTALL THE CANOPY

Once the electrical connections have been made, mount the canopy against the hanger bracket, place it cor-
rectly by inserting the 2 screws of the hanger bracket in the notches of the canopy, turn the canopy until the
screws lock in the notches and tighten the screws.
Be careful to not damage / pinch the electrical wires and the antenna wire.

13. INSTALL THE BATTERIES IN THE REMOTE CONTROL

NOTE : If you intend to not use your remote control or ceiling fan for a long time, we advise you to
remove the batteries from the remote control to preserve it.
The remote control works with 2 batteries 1,5V AAA.
In order to insert the batteries or change the batteries when they are empty :
Slide the battery compartment cover (on the back of the remote control) downwards to remove it. Insert 2
batteries 1,5V AAA by respecting the polarity.
Close the cover by sliding it upwards.
28
2 batteries Back of the
1.5V AAA remote control
Cover of the
batteries