Description; Filling The Water Tank - Fanelite MIK-06EX Notice D'installation Et D'utilisation Succincte

Whether with respect to the purchaser, installer or any other
person, our company can not under any circumstances be held
liable for any physical or material damage of any kind whatsoever,
which may be caused by our products or which would be the direct
or indirect consequence of the use of our products.

3. DESCRIPTION

1. Control panel
2. Water tank cover
3. Remote control
4. Power cord
5. Water level scale
6. Water tray screw
7. Water tray
8. Air inlet
9. Air outlet

4. FILLING THE WATER TANK

To fill the water tank, open the water tank cover
at the top of the unit then fill with water until the
orange water level indicator reach the top of the
water level scale (at the back of the unit).
CAUTION : Remove the remote control first to
avoid any damage. For optimum cooling
performance and to avoid water flows, never
fill the tank higher than the maximum limit
indicated on the appliance. Use only water, no
other liquid and/or chemical can replace
water.
22