Install The Canopy - Fanelite 100YFT-200 TIGA Mode D'emploi

- Connect the ground wire of the ceiling to the ground wire of the hanger bracket in the domino E (EARTH :
yellow and green wire of the hanger bracket).
- Connect the ground wire of the receiver in the domino E (yellow and green wire of the receiver).
- Connect the ground wires connectors of the hanger bracket to those of the ceiling fan.
Check that all electrical connections have been correctly made and that the receiver and the wires are prop-
erly stored in the hanger bracket.

11. INSTALL THE CANOPY

Once the electrical connections have been made, mount the canopy against the hanger bracket, place it cor-
rectly and fix it using the 2 screws. Be careful to not damage / pinch the electrical wires and the antenna wire.
28