Height Under Blades; Unpacking Check - Fanelite 100YFT-200 TIGA Mode D'emploi

installed and carry electricity.
A connection box is required. Never use a plastic box.
FANELITE ceiling fans can weigh up to 25 kg with accessories. Make sure that your ceiling fan hanger brack-
et is firmly attached and that your installation can support a weight of at least 200 kg.
For your own safety and that of others, please check the weight of your ceiling fan and adjust the resistance
of your installation if necessary. The ceiling fan hanger bracket must be supported by the ceiling structure.
Your installation must also be able to withstand the vibration caused by your ceiling fan when it is working.
Even a well-balanced ceiling fan causes vibration when it works.

5. HEIGHT UNDER BLADES

The minimum recommended distance between the floor and the blades is 230 cm.
You can use a meter to check this height (level of your floor / lower limit of the blades).

6. UNPACKING CHECK

Before assembling your ceiling fan, remove all parts from the package and make sure that all of the following
components are present :
Hanger
bracket
Canopy
Remote control
and receiver
22
Hanger studs
(For concrete ceiling)
Coupling cover
6 blades
Tube 100 cm
Coupling cover ring
Blades screws
Motor
Bottom cover