Notes; Height Under Blades; Unpacking Check - Fanelite 52YFT-1021 CANOUAN Mode D'emploi

- Immediate or delayed damages resulting from improper handling during transport, mishandling, falling,
shock, contact with water, sand or any other substance, etc.
- Improper treatment of the product due to inappropriate environment (poor aeration, exposure to moisture or
strong heat, vibration, non-adapted power supply, surge, etc.).
Whether with respect to the purchaser, installer or any other person, our company cannot under any
circumstances be held liable for any physical or material damage of any kind whatsoever, which may
be caused by our products or which would be the direct or indirect consequence of the use of our
products.

4. NOTES

In most houses, the ceiling fan is placed in the center of the room, replacing a light. In this way, the ceiling fan
provides evenly distributed airflow throughout the room.
Since a ceiling fan typically requires no more power than a light, the existing electrical circuit should not be
overloaded. But if the ceiling fan is equipped with lamps, make sure the electrical circuit is strong enough to
support the load. If this is not the case, you will need to install a new circuit with a new circuit breaker on the
main electrical panel or an auxiliary panel so that the ceiling fan has its own circuit without powering any other
device. If there is no central light in the room, you will need to define a location where the ceiling fan will be
installed and carry electricity.
A connection box is required. Never use a plastic box.
FANELITE ceiling fans can weigh up to 25 kg with accessories. Make sure that your ceiling fan mounting
bracket is firmly attached and that your installation can support a weight of at least 68 kg.
For your own safety and that of others, please check the weight of your ceiling fan and adjust the resistance
of your installation if necessary. The ceiling fan mounting bracket must be supported by the ceiling structure.
Your installation must also be able to withstand the vibration caused by your ceiling fan when it is working.
Even a well-balanced ceiling fan causes vibration when it works.

5. HEIGHT UNDER BLADES

The minimum recommended distance between the floor and the blades is 230 cm.
You can use a meter to check this height (level of your floor / lower limit of the blades).

6. UNPACKING CHECK

Before assembling your ceiling fan, remove all parts from the package and make sure that all of the following
components are present :
Mounting bracket Motor cover Motor block
15