Frequency Bands And Power; Specific Absorption Rate (Sar) - Crosscall CORE-M4 Mode D'emploi

Masquer les pouces Voir aussi pour CORE-M4:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
ACCESSORIES AND SOFTWARE INFORMATION
We recommend that you use the following accessories:
ACCESSORY
The product software version is L1551.X.XX.XX.XXXX (where X=0 to 9, A to Z, representing
updates to the user experience, security patches, etc.). Software updates are published
by the manufacturer to correct bugs or improve features after the product launch. All the
software versions published by the manufacturer have been verified and always comply
with the applicable regulations.
Not all the radio frequency settings (for example the frequency band and output power)
are accessible by the user or can be modified by him/her. The latest information relating
to accessories and software is available in the Declaration of Conformity, which can be
viewed on the website:

SPECIFIC ABSORPTION RATE (SAR)

• This device complies with the directives relating to radio frequency exposure, when it
is used near the head or at a minimum distance of 5mm from the body. According to
ICNIRP guidelines, the SAR limit is 2.0 watts/kg for head and body, and 4.0 watts/kg for
limb on average for 10g of cellular tissue absorbing the majority of frequencies.
Maximum values for this model:
• SAR Head: 0.72 (W/kg) ==> authorised limit value: 2 (W/kg)
• SAR Body: 1.32 (W/kg) ==> authorised limit value: 2 (W/kg)
• SAR Limb: 2.55(W/kg) ==> authorised limit value: 4 (W/kg)
CORE-M4 , designed in France and assembled in China
Created and imported by: CROSSCALL – 245 RUE PAUL LANGEVIN 13290 AIX EN Pce –
France
Please visit the www.crosscall.com website to get the complete version of the user guide.
MODEL
Trademark : Crosscall
Model :
CSCM4CM4GO.BK.EU
Crosscall ref:
EP.CORE.BK.2019
Crosscall ref:
CABL.COM4.GO.BU
68
TECHNICAL DATA
Input voltage : 100-240V~
Input AC frequency : 50/60Hz
Output voltage : 5.0V
Output current : 1.0A
Output power : 5.0W
Average active efficiency : 73.82%
Efficiency at low load (10%) : --
No-load
power
consumption
0.084W
IPX4
USB / USB-C
:

Publicité

Table des Matières
loading

Table des Matières