Getting Started Installing The Sim Card; Switching The Phone On And Off - Crosscall CORE-M4 Mode D'emploi

GETTING STARTED
Installing the sim card
1. Check that your device is turned off
If not, turn the power off by pressing the On/Off button
2. Open the SIM tray using the SIM eject tool provided
a.Take the tool provided
b.Insert it into the hole, as shown below, to eject the SIM tray from its housing.
3. Pull out the tray completely with the metal side facing upwards
4. Insert the SIM cards
a. Insert the SIM card, face down, in the smallest compartment
b. If you wish, insert a second SIM card (or an SD card up to 256GB), face down, in the
biggest compartment.
5. Insert the tray back in the phone
a.Check that the cards are properly aligned.
b.Check that the tray is properly aligned with the slot in the phone when you insert it.
c.Insert the tray and push it in, as indicated below.
Please note: To ensure that your smartphone is watertight, make sure that the tray is
completely inserted and locked.

SWITCHING THE PHONE ON AND OFF

42