Battery Saver Mode; Tips And Precautions For Charging Your Battery - Crosscall CORE-M4 Mode D'emploi

To disable the Power saving mode, click on
Or via the pop up once the battery life goes
under 20%

BATTERY SAVER MODE:

This mode is less restrictive than the "Power saving mode". It dims the screen of your
phone and limits CPU performance to conserve battery power.
Accessible via the notifi cation bar (by swiping from the top to the bottom of the screen),
icon battery saver.
To disable this mode, press the same icon again. If you hold down this icon for a few
seconds, you will see information about your battery status.

Tips and precautions for charging your battery

The battery is built into the phone and is not removable. Do not remove the battery
yourself.
• Use only approved chargers, batteries and cables. Using unapproved chargers or cables
may cause the battery to explode or damage the phone.
• Avoid using your phone while charging. Do not cover your phone or the power adapter.
• Incorrect charger connection could seriously damage your phone. Any damage caused
by misuse is not covered by the warranty.
• If the AC power is lower, your phone may take longer to charge.
• If you use unconventional chargers such as computers, the charging time may be longer.
• Please charge the battery before using the phone for the fi rst time and unplug the
charger immediately after the fi rst charge is complete.
• Remove the charger from the electrical outlet when the phone is not charging.
• The phone may not switch on straight away if you are charging a drained battery. Once
the phone has been charging for a while, the phone will start normally.
• The charging time may vary depending on the ambient temperature and the remaining
battery level.
> Disable Power saving mode.
50