Keypad Description - Ksenia lares wls 96-IP Manuel D'installation

PARTS IDENTIFICATION BOX
1 GSM antenna
GSM expansion module (optional)
2
Slot micro SIM Card
3
4 PSTN expansion module (optional)
Indoor siren
5
Condition LED
6
LED
7
RF 868 Antenna
8
LINE /TEL: Connecting terminals to the telephone line
9
10 Power terminal block (att. 220V)
11 BUS terminal block, Removable inputs / outputs.
12 Backup battery KSI7212020.000 (not included in the panels)
13
Fixing holes
Big openings for cable routing
14
micro SD Slot for system upgrade and create / restore
15
backup configuration (Micro SD not included)
Fuse
16
Support screw tamper
17
18 Power supply
S1 Switch (Reset / Data Factory)
Switch (Secureweb Registration)
S2
Soft Touch keyboard.
1
ESC button
2
ENTER button
3
soft touch Scroll for menu navigation.
4
4.1. Scroll to Sx.
4.2. Scroll to down.
4.3. Scroll to Dx.
4.4. Scroll to UP.
Dot-matrix display.
5
Bidirectional audio.
6
Proximity Reader.
7
If present, the on board Keypad is using the soft-touch Technology, otherwise the KP place will be
closed by a cover of the same Box Color.
However, remotely, it is possible to adopt:
1. Wired Keypads at choice between the Model 'ergo M' and/or 'ergo S'.
2. 'ergo wls' Keypads (up to 4)
PARTS IDENTIFICATION
FRONT COVER PARTS IDENTIFICATION
Front cover
19
20 BUS connection terminal
hole for speaker cables
21
22
Integrate speaker
23 Ethernet Connector
24
QR-code of centralization Label
Battery Connectors
25
KEYPAD DESCRIPTIONS
5
1
7
6
4.4
4
3
4.3
4.1
4.2
2
EN
37