Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

the indicators
start to flash and the display is blank.
2. Press
• The indicators
off.
• The indicator
flash.

7. OPTIONS

7.1 Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid
and detergent functions. They can also
contain other cleaning or rinsing agents.
This option deactivates the release of
salt. The salt indicator does not come on.
With the use of this option the
programme duration is prolonged to
increase the cleaning and drying results
with the use of multi-tablets.
Multitab is not a permanent option and
must be selected at every cycle.
How to activate Multitab
Press
The related indicator comes on.
7.2 TimeSaver
This option increases the pressure and
the temperature of the water. The
,
,
,
continues to
Desired options must be
activated every time before
you start a programme. It is
not possible to activate or
deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.
.
• The display shows the current
and
3. Press
and
go
= Acoustic signal on.
4. Press the on/off button to confirm
the setting.
washing and the drying phases are
shorter.
The total programme duration decreases
by approximately 50%.
The washing results are the same as with
the normal programme duration. The
drying results can decrease.
How to activate TimeSaver
Press
If the option is not applicable to the
programme, the related indicator does
not come on or it flashes quickly for a
few seconds and then goes off.
The display shows the updated
programme duration.
7.3 ExtraHygiene
With this option you have better hygiene
results. During the last rinsing phase, the
temperature stays at 70 °C for at least 10
minutes.
How to activate ExtraHygiene
Press
If the option is not applicable to the
programme, the related indicator does
not come on or it flashes quickly for a
few seconds and then goes off.
The display shows the updated
programme duration.
setting:
= Acoustic signal off.
to change the setting.
, the related indicator comes on.
, the related indicator comes on
ENGLISH
31

Publicité

Table des Matières
loading

Table des Matières