Publicité
Les langues disponibles
Les langues disponibles
EXTINGUISHING
•
To extinguish – stop adding fuel and allow fire to die or douse with sand. DO NOT use water as this may
damage the product.
STORAGE
•
When not in use, and if stored outside, cover the product once it has cooled completely with a Redfire
Weatherproof Cover.
•
Remove loose paint and rust with a wire brush when needed and re-paint the product using High
Temperature Paint.
Parts list
Prior to assembly, read the instructions carefully. Check all parts against the parts list.
Carry out assembly on a soft surface to avoid scratching the paint. Please retain this information for future
reference.
For ease of assembly only loosely tighten bolts and then tighten fully when assembly is complete.
WARNING - DO NOT overtighten bolts; only tighten with moderate pressure to avoid damaging the bolts or
components of the product.
Publicité
