Red Fire Tulsa Instructions D'emploi page 4

LIGHTING & REFUELLING
• This product is ONLY suitable for use with untreated wood, logs or La Hacienda HeatBlox.
• Prepare a stack of loosely crumpled newspaper and place on top of the log grate.
• Pile finely split dry firewood or kindling on top of the paper.
• To light the newspaper, use long safety matches or a long nosed lighter.
• Once sufficiently alight, add logs or larger pieces of untreated wood to the unit to increase the heat
slowly.
• DO NOT overload with fuel, only one or two logs is sufficient.
• ALWAYS use heat resistant gloves and the safety tool when adding fuel and handling the mesh
cover, as the unit will become very hot.
EXTINGUISHING
• To extinguish – stop adding fuel and allow fire to die or douse with sand. DO NOT use water as this
may damage the product.
STORAGE
• When not in use, and if stored outside, cover the product once it has cooled completely with a La
Hacienda weatherproof cover.
• Remove loose paint and rust with a wire brush when needed and re-paint the product using La
Hacienda High Temperature Paint.
WARNING - DO NOT over tighten bolts; only tighten with moderate pressure to avoid damaging the
bolts or components of the firepit.
Assembly diagram