Options - Zanussi ZDT12002FA Notice D'utilisation

Programme
1)
2)
3)
1) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
2) This is the standard programme for test institutes. With this programme you have the most efficient use of
water and energy consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for test
information.
3) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and
bad odours to come out from the appliance.
Do not use detergent with this programme.
1)
Programme
1) The water pressure and temperature, the variations of the mains supply, the options and the quantity of
dishes can change the programme duration and the consumption values.

Options

Acoustic signals
The acoustic signals operate in these condi-
tions:
• When the programme is completed.
• A malfunction occurs to the appliance.
Factory setting: on.
You can deactivate the acoustic signals.
18
Degree of soil
Type of load
Normal soil
Crockery and cutlery
Fresh soil
Crockery and cutlery
Normal soil
Crockery and cutlery
All
Duration (min)
85-95
100-110
30
130-140
12
Programme phases
Prewash
Wash 65 °C
Rinses
Dry
Wash 65 °C
Rinse
Prewash
Wash 50 °C
Rinses
Dry
Prewash
Energy (kWh)
1,8-2,0
1,4-1,6
0,9
1,0-1,2
0,1
Deactivating the acoustic signals
1. Press the on/off button to activate the appli-
ance.
2. Make sure that the appliance is in setting
mode. Refer to 'SETTING AND STARTING
A PROGRAMME'.
3. Press and hold the programme button until
the programme indicator (A) flashes and the
programme indicator (B) comes on.
4. Press immediately the programme button.
Options
Half-load
Half-load
Water (l)
22-25
19-21
9
14-16
5
www.zanussi.com